Perfecoat Plastic Adhesion Promoter Quart - PC-3340
Perfecoat PC-3340 is a single-component transparent fast drying primer. It is used for Plastic Adhesion Promoter in parts.
SUBSTRATES: Plastic parts PP, PA, PE.
SURFACE PREPARATION:Wet sanding: Sanding with P800-P1000, remove wax, silicon or other contaminations with 3910 Degreaser.
Dry sanding: Sanding with cleaner.
APPLICATION: Spray gun set up and pressure:
RP : 1.3mm 29-36psi HVLP : 1.3mm 26-29psi
Coats & Thickness:
1-2 Coats, 4-5pm Flash off time: 3-5 mins. between coats @ 73°F
Air drying time: allow 5-10 mins. @ 73°F
Shelf Life: 2 years in original sealed can at cool and dry place at 41-95°F.
CLEARNING:
Clean equipment immediately with solvent after application PHYSICAL DATA:
voe: 7 .o lbs/gal FOR PROFESSIONAL USE ONLY Read MSDS Before Use
NOTE: The information in this data sheet is based on our knowledge and the current laws. It is always the responsibility of the user to fulfill the requirements of local rules and legislations. The uncertain factors may affect the application of products, such as the condition of substrate. We do not accept any liability on loss, damage and performance of products unless we issue a special agreement. Always read the latest Material Data Sheet and the Technical Data sheet before applying the products.
